Heating
Showing 19–26 of 26 results
-
Heatpump 16 kW
Minimum rental period: 7 days Specifications: Cooling min/max water temperature 5°C – 25°C Heating min/max water temperature 25°C – 65°C Cooling capacity 15,4 kW Heating capacity 15,7 kW Connection voltage 400V / 16A / 50 Hz Cooling operating conditions -25°C / +35°C Heating opeating conditions -15°C / +48°C Water pressure 3 m³/h Refrigerant R32... -
Heatpump 8 kW
Minimum rental period: 7 days Specifications: Cooling min/max water temperature 5°C – 25°C Heating min/max water temperature 25°C – 65°C Cooling capacity 8,3 kW Heating capacity 8,2 kW Connection voltage 230V / 16A / 50 Hz Cooling operating conditions -25°C / +35°C Heating opeating conditions -15°C / +48°C Water pressure 2,6 m³/h Refrigerant R32... -
T-300 Buffertank with pump
Minimum rental period: 7 days Specifications: -
Chiller CSC-60
Minimum rental period: 7 days Specifications: -
Electric heater CEH 200
Electric heater CEH 200 This robust heater has a heating capacity of 40 kW. By means of... Featured specs Capacity 40 kW (34,394 kcal) Air displacement 3,000 m³/h -
Electric heater CEH 300
This robust stove has a heating capacity of 80 kW. By means of the 3 position switch, ... Featured specs Capacity 80 kW (68788 kcal) Air displacement 6000 m³/h -
Brazed Heat exchangers
The Brazed heat exchanger PBF8M-16 has 4 connections; 2 on the left side and 2 on the right side, also called warm side or cold side... Featured specs: From 1Kw - 1.5Mw -
Plate heat exchangers
The heat exchanger WW-150 has 4 connections... featured specs: 1¼" Camlock - Working pressure 10 bar
Calculation of the heating capacity
With the table below you can easily make a calculation for heating a standard industrial hall. By applying the correct calculation, the right solution for heating can be offered.
Starting points and points of attention:
- Daylight in wall and/or roof approx. 15%;
- Floor structure concrete on sand;
- Pay attention to extraction installations, racks and crane tracks;
- Note the number and position of company doors;
- Note any heat gain from machines and lighting;
- All capacities (in kW) apply at an indoor temperature of 15°C and an outdoor temperature of -10°C;
- For every degree Celsius more or less, the power must be corrected by 4.0%.
Calculation example air heaters
| Volume: 5,000 m³ | Height: 6 meters | Insulation value: Rc = 2.5 | Desired indoor temperature: 17°C |
- In the heating capacity table you can read under Rc = 2.5 and a capacity of 5,000 m³ 80 kW (at 15°C).
- To achieve a room temperature of 17°C, the required power is: 80 kW + (2×4.0%) = 86.5 kW.
- Read the required circulation quantity: at least 15,000 m³/h.
- Depending on the layout of the hall, you divide the capacity over 1 or more air heaters. This gives a better heat distribution.
Calculation for customized heating
For an accurate calculation of the heating capacity, especially for large rooms or complicated air ducts, please contact CSrental. We at CSrental analyze the individual needs on location, determine the specific device needs and work out a custom project solution.
Average monthly temperature
The table below shows the average monthly temperature. This gives you insight into which periods certain solutions can be important. In the colder months, heating/humidification may apply.
