Description
The CSC 38 chiller from CSrental is equipped with environmentally friendly technology that ensures maximum efficiency with minimal electricity consumption and meets the latest technical requirements. By means of pipes and accessories, the CSC chiller can be connected to almost any existing system or process.
The chiller is standard equipped with a pump and buffer vessel so that installation can be done quickly and easily. The chillers are often used as process coolers or for planned maintenance of existing chillers/coolers
Minimum rental period: 7 days
Cooling capacity max. 37 kW / +12/7°C
Air flow rate16.400 m³/h
Water flow 6,4 m³/h
Available pressure 245 kPa
Tank capacity 270 L
Coupling 2″ Camlock
Max. power consumption31,8 A
Power consumption 15,3 kW
Connection voltage 400 V / 50 Hz / 32 A
IP class 54
Noise level 54 dB (at 10 m)
Dimensions L x W x H 1.880 mm x 1.300 mm x 2.070 mm
Weight 814 kg excluding liquids
Mobility Forklift / crane
Water quality requirements
When using water as a secondary fluid, the quality of the water must meet the requirements specified in the table below.
| Parameter | Value |
| pH | Between 7 – 9 |
| Electrical conductivity | 100 – 700 µS/cm |
| Solphates SO4- | < 100 mg/l |
| Bicarbonate HCO3- | < 200 mg/l |
| Cloride C1- | < 50 mg/l |
| Phosphate PO4 3- | < 2 mg/l |
| Carbon dioxide CO² | < 5 mg/l |
| Oxigen O2 | < 0,1 mg/l |
| Nitrates NO3- | < 5 mg/l |
| Ammonia NH3 | Absent |
| Hydrogen sulfide H2S | Absent |
| Chlorite | Absent |
| Free chlorine | < 0,2 mg/l |
The following liquids are strictly prohibited:
– Demineralised water;
– Distilled water;
– Sea water;
– Other liquids that differ from the standard Ethylene/Propylene glycol.
Reviews
There are no reviews yet.