Heating
Showing 10–18 of 26 results
-
CSM Mobile boiler 350 kW
Our middle class. With a heating capacity of 350 kW and an extremely compact design, this is a real...
Featured specs Heat output 160 - 350 kW
Dimensions L x W x H approx. 6,000 x 2,550 x 2,700 mm (incl. drawbar, without chimney)
-
CSM Mobile boiler 150 kW
The smallest of our mobile trailer systems. Equipped with the latest low-NOx... Featured specs Heat output 90 - 150 kW Dimensions L x W x H approx. 4,500 x 2,150 x 2,250 mm (incl. drawbar, without chimney) -
MWS-500 Buffervat
De MWS 500 Buffervat is een watertank... -
Heatpump 16 kW
Minimum rental period: 7 days Specifications: Cooling min/max water temperature 5°C – 25°C Heating min/max water temperature 25°C – 65°C Cooling capacity 15,4 kW Heating capacity 15,7 kW Connection voltage 400V / 16A / 50 Hz Cooling operating conditions -25°C / +35°C Heating opeating conditions -15°C / +48°C Water pressure 3 m³/h Refrigerant R32... -
Oil fired heater ID-300M
The Oil fired heater ID300M is an indirectly fired diesel heater, equipped with... Featured specs Capacity 45 kW (38,793 kcal) Fuel consumption max. 4.5 (l/h) Air displacement 3,000 m³/h -
Oil fired heater ID-800M
The oil fired heater ID-800M is a mobile, indirectly fired diesel heater,... Featured specs Capacity 110 kW (94,828 kcal) Fuel consumption max. 10.9 (l/h) Air displacement 10,000 m³/h -
Oil fired heater ID-500M
The oil fired heater ID-500M is an indirectly fired diesel heater,... Featured specs Capacity 70 kW (60,345 kcal) Consumption max. 7 (l/h) Air displacement 3,800 m³/h -
Oil fired heater ID-1200M
The Oil fired heater ID-1200M (also known as IMA200RHP) is a mobile, indirectly fired diesel heater,... Featured specs Capacity 200 kW (17.2414 kcal) Fuel consumption max. 19.4 (l/h) Air displacement 13,000 m³/h -
Oil fired heater ID-1500
The Oil fired heater ID-1500 is a portable, indirectly fired... Featured specs Capacity 160 kW / 220 kW (18.9655 kcal) Fuel consumption max. 13.5 / 18.0 (l/h) Air displacement 9,780 / 13,860 m³/h
Calculation of the heating capacity
With the table below you can easily make a calculation for heating a standard industrial hall. By applying the correct calculation, the right solution for heating can be offered.
Starting points and points of attention:
- Daylight in wall and/or roof approx. 15%;
- Floor structure concrete on sand;
- Pay attention to extraction installations, racks and crane tracks;
- Note the number and position of company doors;
- Note any heat gain from machines and lighting;
- All capacities (in kW) apply at an indoor temperature of 15°C and an outdoor temperature of -10°C;
- For every degree Celsius more or less, the power must be corrected by 4.0%.
Calculation example air heaters
| Volume: 5,000 m³ | Height: 6 meters | Insulation value: Rc = 2.5 | Desired indoor temperature: 17°C |
- In the heating capacity table you can read under Rc = 2.5 and a capacity of 5,000 m³ 80 kW (at 15°C).
- To achieve a room temperature of 17°C, the required power is: 80 kW + (2×4.0%) = 86.5 kW.
- Read the required circulation quantity: at least 15,000 m³/h.
- Depending on the layout of the hall, you divide the capacity over 1 or more air heaters. This gives a better heat distribution.
Calculation for customized heating
For an accurate calculation of the heating capacity, especially for large rooms or complicated air ducts, please contact CSrental. We at CSrental analyze the individual needs on location, determine the specific device needs and work out a custom project solution.
Average monthly temperature
The table below shows the average monthly temperature. This gives you insight into which periods certain solutions can be important. In the colder months, heating/humidification may apply.
